Soniq E40S12A User Manual download pdf (Page 13)

3. Press the Navigation buttons to scroll to Ethernet configuration and press OK.

Settings

Wireless & networks

Ethernet configuration

Display

Security Settings

Applications

Privacy

External Storage & internal storage

Language & keyboard

About Device

Smart TV Function

4. Press Ok button to mark Connection Type and press Save for confirm.

5. If wired and wireless are simultaneously con nected, the system will automatically default as wired connection.

6. If you have already set the Network Setting, select Resetting. The new connection settings will reset the current

network settings.

7. Connection Type:

-Static IP: If selecting Static IP, press the Navigation and Number buttons. IP addresses will need to be input

manually.

Ethernet configuration

Ethernet

Ethernet configuration

Turn off Ethernet

Configure Ethernet devices

Configure Ethernet Device

Ethernet Devices:

eth0

Connection Type

Dhcp

Static IP

Ip address

192.168.1.184

Netmask

255.255.255.0

Default Router

192.168.1.1

DNS address

221.5.88.88

Save Discard

-DHCP: Select this if there is a DHCP server(Router) on the local area network (LAN) via wired connection, the

TV will automatically be allocated an IP address. If you're using a broadband router or broadband modem that

has a DHCP (Dynamic Host Configuration Protocol) server function. The IP address will automatically be

determined.

Ethernet configuration

Ethernet

Ethernet configuration

Turn off Ethernet

Configure Ethernet devices

Configure Ethernet Device

Ethernet Devices:

eth0

Connection Type

Dhcp

Static IP

Ip address

Netmask

Default Router

DNS address

Save Discard

Smart TV Function

-IP Manual Setting: Select if there is no DHCP server on the network or you want to set the IP address manually.

8. When you are finished, press EXIT.

Ethernet configuration

Ethernet

Ethernet configuration

Turn off Ethernet

Configure Ethernet devices

Configure Ethernet Device

Ethernet Devices:

eth0

Connection Type

Dhcp

Static IP

Ip address

192.168.1.184

Netmask

255.255.255.0

Default Router

192.168.1.1

DNS address

221.5.88.88

Save Discard

eth0

NOTE

If you want to access the Internet directly on your TV, the broadband internet connection should always be on.

If you cannot access the Internet, check the network conditions from a PC on your network.

When you use network settings, check the LAN cable or check if the DHCP in the router is turned on.

If you do not complete the network settings, the network may not work properly.

Connecting to a wireless network

The SONIQ Wireless LAN for Broadband Adap tor, which is sold separately, allows the TV to connect to a wireless

LAN network.

The network configuration and connection method may vary depending on the equipment in use and the network

environment. Refer to the setup instructions supplied with your access point or wireless router for detailed

connection steps and network settings.

Setting up the AP (Access Point) or the wireless router is required before connecting the TV to the network the

easiest method is the WPS button method.

To set up the wireless & network settings,

1. Press Home to access the Home menus.

2. Press the Navigation buttons to scroll to Settings and press OK.

Remark: the TV only supports SONIQ AUW100 or AUW300 USB Wi-Fi Dongle which is sold separately.

-23-

-24-

Wi-Fi Dongle

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 24 25

Comments to this Manuals

No comments

Soniq E40S12A User Manual Page 13

Comments to this Manuals

Related products and manuals for For Home Soniq E40S12A